Publicidad
Idiomas disponibles
Idiomas disponibles
MAIN COMPONENTS
•
1.5 mm stainless steel air inlet casing and front.
•
Infrared sensors located near the air outlet and informative LED light in the same area.
•
Structural base and internal nozzles made of fire-proof thermoplastic material.
•
Universal high pressure motor with protective element.
•
Heating resistance with thermal limiter.
•
HEPA H14 air filter element.
•
Internal outgoing air sanitisation components (UVC light and negative ion/ozone generator).
•
Automatic disconnection of the UVC light generator when the casing is opened.
•
Smart electronic circuit. Adjusting of detection distance and motor power. Heating resistance
disconnection switch and total appliance disconnection switch.
•
Odour neutralising pad (optional).
HOW TO USE
The dryer is operated by bringing the hands towards the sensor exposure area. These are located in
the air outlet. The detection distance is adjustable, from 60–150 mm.
To dry hands properly, it is advised to rinse them properly beforehand, removing any soap residue.
Maximum continuous run time is 30 seconds. After this time, the hands must be moved away and
brought closer again to start a new drying cycle.
The appliance disconnects if anything is inserted or stuck to the sensor area (sticker, gum, etc.), pre-
venting the dryer from activating when it shouldn't.
This appliance is not intended for use by individuals with reduced physical, sensory or mental
capabilities (including children under the age of 8) or with lack of experience or knowledge, unless
they do so under the supervision of a responsible person who knows how to use it and having been
warned of the possible safety risks.
It is necessary to ensure that children do not play with the dryer and are supervised.
Publicidad
