Publicidad
Idiomas disponibles
Idiomas disponibles
Assembly - Attaching the Blades
1
Attaching the blades to
the motor
WARNING: To reduce the risk of personal injury, do
not bend the blades, balance the blades or clean the
fan during installation. Do not insert foreign objects in
between rotating fan blades.
NOTE: Take care not to scratch fan motor assembly
when installing blades.
□
Attach a blade (D) to the fan motor assembly (C) by inserting the
blade (D) into slots in the side of the fan motor assembly (C) and
aligning the three screws holes in the blade with the holes in the
center flywheel and secure with screws (AA).
□
Make sure all the screws are firmly tightened.
□
Repeat these steps for the remaining blades.
Assembly - Attaching the Light Kit
1
Installing the light kit pan
□
Remove one screw (DD) from the black bracket below the fan
motor assembly (C), and loosen but do not remove the other two
screws.
□
Push the light kit pan (E) up to the fan motor assembly (C) so that
the two loosened screw heads fit into the keyhole slots. Turn the
light kit pan (E) clockwise.
□
Re-install the screw (DD) that was removed in step 1.
□
Make sure all the screws are firmly tightened.
10
D
C
AA
C
E
DD
Publicidad
