Publicidad
Idiomas disponibles
Idiomas disponibles
Assembly - Hanging the Fan (continued)
5
Installing the receiver
WARNING: To reduce the risk of fire or electrical
shock, remember to disconnect power. The electrical
wiring must meet all local and national electrical code
requirements. The electrical source and fan must
be 110/120 volt, 60HZ. Do not use this product in
conjunction with any variable wall control. Incorrect
wire connection can damage this receiver.
CAUTION: If other fan wires are different color, have this
unit installed by a licensed electrician.
□ Position the receiver (I) into the fan motor housing.
6
Installing the motor assembly
□
Remove two of the four screws (located diagonally from each
other) (NN) from the top of the mounting plate (A) and loosen the
other two screws (NN).
□
Align the two key slots in the top of the fan motor assembly (C)
with the two loosened screws (NN) on the mounting plate (A).
Push the fan motor assembly (C) up and turn it clockwise to lock
in the mounting plate (A). Tighten the two screws.
□
Install the two screws that were removed at the beginning
of this step into the remaining two holes and tighten the four
screws firmly.
□
Install the trim ring (B) by aligning the ring's slots with the
screws on the mounting plate (A). Rotate the ring clockwise to
lock in place.
A
9
Please contact 1-888-757-7697 for further assistance.
I
C
NN
B
C
Publicidad
