Publicidad
Idiomas disponibles
Idiomas disponibles
Optional Installation - No Light Cover
1
Installing the no light cover
NOTE: : Do not install LED light fixture if using the no-light cover.
□
Place the no light cover (H) into the light kit pan (E), aligning the
three flat areas on the top flange of the no light cover (H) with the
raised dimples in the light kit pan.
□
Turn the no light cover (H) clockwise until it stops.
Optional Installation - Storage Bracket
Mounting the remote control holder
NOTE: A storage bracket is provided for holding your remote
control when not in use. If you desire to use the bracket, install
it on a wall that is away from excess heat or humidity.
NOTE: Screw wall anchors are included for extra support. The
included screws are designed to screw easily into the wall. If
you would like a more permanent or secure hold, install the wall
anchors prior to attaching the wall cradle to the wall.
□
Slide the screw cover plate up to remove it from the wall
cradle.
□
Position the wall cradle in the desired position and attach it to
the wall using the included wall cradle screws.
□
Slide the screw cover plate back onto the wall cradle to
conceal the screws.
Screw cover plate
12
E
H
Publicidad
