Kathy Ireland Home CF153L Guía De Uso Y Mantenimiento página 11

Assembly - Attaching the Light Kit (continued)
2
Attaching the light kit fitter assembly
CAUTION: To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing
the light kit.
□
Remove one screw (EE) from the light kit pan (E) and loosen but
do not remove the other two screws.
□
Connect the wires from the light kit fitter assembly (F) to the
wires from the light kit pan (E) by connecting the molded
adaptor plugs together. Carefully tuck all wires and splices into
the switch cup.
□
Push the light kit fitter assembly (F) up to the light kit pan (E)
so that the two loosened screw heads fit into the keyhole slots.
Turn the light kit fitter assembly (F) clockwise.
□
Re-install the screw (EE) that was removed in step 1.
□
Make sure all the screws are firmly tightened.
3
Attaching glass bowl
WARNING: Allow the glass bowl (G) to cool completely
before removing.
CAUTION: Make sure the power is off before attaching or
removing the glass bowl (G).
□
Place the glass bowl (G) into the light kit pan (E), aligning the
three flat areas on the top flange of the glass bowl (G) with the
raised dimples in the light kit pan.
□
Turn the glass bowl (G) clockwise until it stops.
EE
11
Please contact 1-888-757-7697 for further assistance.
E
F
E
G