Publicidad
Idiomas disponibles
Idiomas disponibles
46 TROUBLESHOOTING
Icemaker
isnot
making
enough
ice (continued)
Dispensing
wafer
slowly.
Doors are opened
often o r for
long p eriods oftime
Doors are not c losed
completely.
The t emperature
setting for t he
freezer istoo warm
Wafer filter has b een exhausted
Reverse
osmosis
filtration
system i sused.
Low house wafer supply
pressure.
Ifthe doors ofthe unit are opened
often, ambient
air w ill warm t he refrigerator
which will prevent
the unit from maintaining
the set t emperature
Lowedng
the refrigerator
temperature
can help,
as well as not o pening
the doors as frequently.
Ifthe doors are not p roperly
closed, ice
production
will beaffected.
See t he Doors will
not close completely
or pop o pen section
inParts
&Features
Troubleshooting
for m ore information
The recommended
temperature
for t he freezer
compartment
for n ormal
ice production
isO°F ( -18°C)
Ifthe freezer
temperature
iswarmer,
ice production
will be affected
Itisrecommended
that you r eplace
the w ater filter:
•
Approximately
every six months
•
When
the water filter indicator
turns on.
•
When
the water dispenser
output
decreases
•
When
the ice cubes are smaller than normal.
Reverse
osmosis
filtration
systems
can
reduce
the
wafer
pressure
below
the
minimum
amount
and
result
in icemaker
issues
If the problem
persists,
it may be necessary
to
contact
a plumber
The wafer pressure
must be between
20 and 120
psi (140 and 830
kPa) on models
without
a water
fiber and between
40
and 120 psi (280
and 830
kPa) on models
with a wafer filter.
If the problem
persists,
if may be necessary
to
contact
a plumber
Publicidad
