Publicidad
Idiomas disponibles
Idiomas disponibles
HG 530 18
■ DO NOT use this tool to remove paint
containing lead. The peelings, residue and
vapors of paint may contain lead which is
poisonous.
■ Please be aware that heat is directed
to covered flammable materials, which
may ignite.
■ Safely place the heat gun on the
storage surfaces after use and let it cool
completely before packing it away. The
hot nozzle can cause damage.
■ Place the heat gun on a stable, level
surface when not hand held.
■ Do not let children use the heat gun
unsupervised when it is switched on.
■ Store idle heat guns out of the reach
of children. Do not allow persons
unfamiliar with the heat gun or these
instructions to operate the tool. Heat
guns can be dangerous in the hands of
untrained users.
■ Always wear safety goggles. Safety
goggles reduce the risk of injury.
■ Keep your work area well-ventilated.
The gas and steam produced during work
are often harmful to one's health.
■ WARNING! Hot Surfaces. Always hold the
heat gun by the plastic enclosure. Do not
touch nozzle, nozzle attachments or store
heat gun until the nozzle has cooled to
room temperature.
■ Do not direct the airflow at persons or
animals.
■ Do not direct the heat gun air airflow at
clothing, hair or other body parts. Do
not use as a hair dryer. Heat guns can
produce 530°C or more of flameless heat
at the nozzle. Contact with the air stream
could result in personal injury.
■ Do not direct airflow directly on glass.
The glass may crack and could result in
property damage or personal injury.
■ Do not leave the heat gun unattended
when it is switched on.
■ Remove the battery before adjusting the
tool settings, changing accessories, or
storing the heat gun. This safety measure
prevents the heat gun from being started
accidentally.
■ Do not expose to rain or moisture. Store
indoors in a dry location.
Technical data
Tool
Type
Rated
Vdc
voltage
Airflow
l/min
Temperature ℃
Weight
according
to"EPTA
Procedure
kg
01/2003"
(without
battery)
Battery
18V
(Li-ion)
Weight of
kg
battery
Working
-10~40℃
temperature
Storage
< 50℃
temperature
Charging
4~40℃
temperature
Charger
CA 10.8/18.0, CA 18.0-LD
Overview (see figure A)
The numbering of the product features refers
to the illustration of the machine on the
graphics page.
1.
Nozzle
2.
Power setting
3.
Lock-on button
4.
Handle
5.
Lock-off lever
6.
Trigger switch
7.
LED worklight
8.
Strap fixing
9.
Flat nozzle attachment
10. Reduction nozzle attachment
11. Reflector nozzle attachment
HG 530 18
Heat Gun
18
High:200
Low: 130
High:530
Low: 260
0.59
AP 18.0/2.5
AP 18.0/5.0
AP 18.0/8.0
AP 18.0/2.5
0.4
AP 18.0/5.0
0.7
AP 18.0/8.0
1.1
11
Publicidad
