Descargar Imprimir esta página

Autool CT150 Manual Del Usuario página 14

Publicidad

Idiomas disponibles

Idiomas disponibles

Turn the pressure adjustment knob to adjust the pressure to
0.25 ~ 0.3MPa. (In the electronic injection system, the general
oil pressure works at 0.25 ~ 0.3MPa)
Press the up and down keys to select the appropriate pulse
width. (The system default is 3ms)
The working time gradually decreases. When it is 0, the system
automatically stops.
03 Medium Speed Test
Select "03 Medium Speed Test".
Press the start button.
The rest of the operation steps are consistent with item 02.
04 High Speed Test
Select "04 High Speed Test".
Press the start button.
The rest of the operation steps are consistent with item 02.
05 Accelerating Test
Select "05 Accelerating Test".
Press the start button.
NOTE
The fuel pressure, working time and pulse width are automati-
cally set by the system. The time system defaults to 10s as a
cycle period, and the user does not need to set it separately.
The system will automatically and continuously cycle three
times to simulate the working condition and fuel injection
volume of the fuel injector when the engine is accelerating
uniformly.
06 Variable Speed Test
Select "06 Variable Speed Test".
Press the start button.
10

Publicidad

loading

Productos relacionados para Autool CT150