Publicidad
Idiomas disponibles
Idiomas disponibles
10 High Speed Spray Volume Test
●
Select "10 High Spray Volume".
●
The rest of the operation steps are consistent with item 08.
NOTE
Flow Balance Test
The flow balance test shall be carried out at different speeds.
When the liquid level in the measuring cylinder is 2/3 of the
measuring cylinder, pause or stop work to observe the balance
of the fuel injection volume. The deviation of the fuel injection
volume of all fuel injection nozzles on a vehicle should not
exceed 2%. Or refer to the relevant technical manual of the fuel
injector to judge the flow balance of the fuel injector.
Observation of Fuel Injection Shape
Observe whether the fuel injection shapes and angles of all
fuel injection nozzles on the same car are uniform at various
speeds. At the same time, you can adjust the opening pulse
width of the fuel injection nozzle to check whether the
minimum opening pulse width of the fuel injection nozzle is
consistent.
Leak Detection Test
The leak detection test is to detect the tightness of the injector
needle valve under the high pressure of the system. (Observe
the tightness of the fuel injector, generally there should be no
leakage within one minute)
11 Reverse Flush Test
●
Press the item selection up and down keys to select "11
Reverse Flush", and install the injectors in the opposite direc-
tion for cleaning.
12 No-disassembly Cleaning
●
Please connect to various special parts that can clean the
combustion chamber or throttle.
13 Unit Info
●
Display the product number and date of manufacture of the
device.
12
Publicidad
