Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE
The fuel pressure, working time and pulse width are automati-
cally set by the system. The time system defaults to a cycle of
10s, and the user does not need to set it separately.
The system will automatically and continuously cycle three
times to simulate the working condition and fuel injection
volume of the fuel injector when the engine is idling, medium
speed, and high speed.
07 Leakage Test
●
Select "07 Leak Test".
●
Press the working time up and down buttons to set the time.
(Generally set to 1 minute)
●
The rest of the operation steps are consistent with item 02.
NOTE
The pulse width system defaults to 3ms, no need to set it
again.
Whether the fuel injection nozzle is dripping and leaking when
the simulated oil pressure is 0.3Mpa.
08 Idle Speed Spray Volume Test
●
Press the item selection up and down keys to select the "08
Idle fuel injecting amount test" item.
The remaining operation steps are consistent with item 02.
●
DESCRIPTION
Simulate the working conditions and fuel injection volume of
the engine when the fuel injection nozzle works for a certain
number of times when the engine is idling.
09 Medium Speed Spray Volume Test
●
Select "09 Medium Spray Volume".
●
The rest of the operation steps are consistent with item 08.
11
Publicidad
