Ergomotion RIO 6.0 Manual De Instrucciones página 16

Syncing Two Bases (optional)
A Sync Cord is included with the base. Not available on Queen, Full or Full-Long size bases.
The Sync Cord connects the two control boxes to a single remote for the synchronization
of two bases. This process is most commonly used for syncing two connected TXL bases.
Control Box 1
Unplug the base(s) from power source.
1
Connect the Sync Cord to the Multifunction port of each Control Box.
2
Plug bases back into the power source.
3
Check to ensure all cords are securely attached. Both remotes will now operate both bases simultaneously.
4
Note: If bases become mismatched, returning the bases to the flat positions will re-sync the mechanical
positions.
Sync Cord
- 16 -
Control Box 2