Keysight U1731C Guia Del Usuario página 66

3 Setup Options
Using the Setup Menu
The Setup menu allows you to change a number of nonvolatile preset features.
Modifying these settings affects the general operation of your LCR meter across
several functions. Select a setting to edit to perform one of the following:
– Switch between two values, such as on or off.
– Cycle through multiple values from a predefined list.
– Decrease or increase a numerical value within a fixed range.
The contents of the Setup menu are summarized in
Table 3-1 Setup menu key functions
Legend Description
Press and hold
ZLCR
P S
Press and hold
DQO
Range
Press
Limit
Auto
Press
display) will flash to indicate that you can now change the menu item values.
Freq.
Press
decrease or increase a numerical value.
Hold ZLCR
While the menu item is flashing, press
Rec
P S
While the menu item is flashing, press
Save
66
while turning the LCR meter ON (
ZLCR
P S
for more than 1 second to exit this mode.
ZLCR
P S
or to step through the menu items.
DQO Range
Limit Auto
or at each menu item to change the preset settings. The menu item (in the secondary
Freq.
or again to switch between two values, to cycle through multiple values from a list, or to
Freq.
) to access the Setup menu.
to save your changes.
Hold
Rec
to discard your changes.
ZLCR
P S
Keysight U1731C/U1732C/U1733C User's Guide
Table 3-2 on page 68.