Cleaning Modes - cecotec CONGA Manual De Instrucciones

Setting time
• Once the day of the week has been confirmed, the hour digits will flash. Use the up
and down direction buttons
and use and
decreased by whole hours, the minutes by 30 minutes.
2. Confirmation or cancellation of schedule
• After setting, aim the remote control at the robot and press
confirm the settings have been saved and the scheduled day will light up steady.
• Press the
day will turn off on the display and the next day will flash.
• Follow the before steps to schedule the desire day again. Once the complete
schedule has been saved successfully, it will exit the schedule mode.
3. Cancel schedule settings
• From the schedule settings, the scheduled day will light up and the non-scheduled
ones will flash. Press
• Then, press
• Once the schedule has been cancelled, press
4. Check schedule
• From the Standby mode or while the robot is on, press
scheduled days will be lit up steady except for the scheduled day closer to the
current day, which will flash.
• Press and
• Press on the remote control to quit the schedule-checking interface manually.
Note: after 10 seconds of no remote-control operation, the display will automatically show the
current time without need of using the remote control.

CLEANING MODES

The robot offers different cleaning modes which adapt to different cleaning needs.
1. Auto cleaning mode
• From the standby mode, press
the remote control and the robot will automatically
start operating.
• It is the most frequent cleaning mode and it is
used to clean the 100 % of the house's surface. The
robot vacuums the floor's dust automatically, in
and organized and efficient way, as it features memory and gyroscopic navigation.
Moreover, it changes direction when it finds obstacles throughout its route and it
returns to the charging base in a smart and direct way once the cleaning is over.
and
to switch between hours and digits. The hours can be increased or
button to cancel the schedule of the selected day. The prescheduled
and to select from Monday to Sunday.
to cancel the selected day. The display will show the next day.
to check the scheduled days.
on the robot or
to increase or decrease the hour and minutes
to exit the schedule mode.
check the schedule. The
ENGLISH
. A beep sound will
27