Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
Connect the drain hose
If the drain hose is already installed as in the diagram below.
1.
Unhook it from the right-hand clip only (see arrow).
2.
Connect the drain hose to the siphon or fasten it to the edge of a sink using the U-bend.
If it is not already installed, attach the U-bend (E) to the end of the drain hose.
Notes:
•
Make sure that the drain hose is not kinked.
•
Secure the hose so that it cannot fall. After the washing phase, the machine
drains the hot water.
•
Small washbasins are not suitable for this purpose.
•
To lengthen the pipe, use a pipe of the same type and secure the fittings
with clips.
•
Max. overall length of the drain hose: 2.50 m.
Electrical connection
•
Make sure that the outlet has an earth connection.
•
Do not use multi-sockets or extension cords.
•
The power supply must be compatible with the rated current of the appliance, i.e. 10 A.
•
The electric cable must only be replaced by a qualified electrician.
•
The electrical connections must be made in accordance with the local regulations in force.
11
EN
Publicidad
