Publicidad
Idiomas disponibles
Idiomas disponibles
4.4 MAIN COMPONENTS OF THE BEMER THERAPY SYSTEM EVO
1
The LED indicator shows whether the B.Box Evo is switched on (white light) or the B.Box Evo
Battery Stand is charging (green light). In the charging state (green light), the device is also ready
for operation. If the LED indicator is white, the B.Box Evo battery holder is not being charged
(e.g., it is already fully charged) or no B.Box Evo Battery Stand is connected.
2
On the top of the B.Box Evo there is a push-button switch to turn the device on and off.
Short press (<2 seconds) puts the device into stand-by mode.
―
Long press (>2 seconds) turns the device off completely.
―
In all states, the applicators are disconnected from the mains to avoid e-smog.
B.Box Evo with all functional elements
3
The magnetic connection ports (Applicator 1 and Applicator 2) for the application modules are
located on the right side. Two applicators can be operated in parallel.
4
On the front there is a high-resolution control panel which serves as the user interface for the
controller. All settings for the B.Box Evo and its applicators are configured via this user interface.
Furthermore, there is a light sensor on the front for automatic adjustment of the display brightness.
5
The removable B.Box Evo Stand is also located here. This can be removed to allow use of the
rechargeable B.Box Evo Battery Stand. The rechargeable B.Box Evo Battery Stand consists of a battery
integrated into a special stand.
6
The ambient light ring is located on the back of the B.Box Evo and indicates the device status via
different light colors.
2119-2208-764120_IFU Evo_USA_PEMF_764120-GC-3015_Inhalt_v08.indd 40
2119-2208-764120_IFU Evo_USA_PEMF_764120-GC-3015_Inhalt_v08.indd 40
1
2
4
3
5
9
B.Box Evo with ambient light ring
40
6
7
8
19.06.2023 09:50:26
19.06.2023 09:50:26
Publicidad
