Publicidad
Idiomas disponibles
Idiomas disponibles
5
6
The c~uration for the timer-activated
period can be set between
5 and 240 minutes
in 5-minute
steps.
* If this step is not completed
within 4 seconds,
repeat from
step 1.
Prepare
the source.
To Iieten to a CD,
load the disc to be played first on tray 1.
To listen to a tape, insert the tape into deck 1 or 2.
To Iieten to the radio, tune in to a station.
Press the POWER
button to turn the unit off after
adjusting
the volume
and tone.
O
remains
on the display
after the power is turned off (timer
standby
mode).
When
the timer-on
time is reached,
the unit turns
on and
begins play with the selected
source,
0 The volume
level is automatically
set to 16 when the power
is turned off with the volume
level set to 17 or more,
To check
the specified
time and source
Press thle TIMER
button. The timer-on
time, the selected
source
name
and the
duration
for the timer-activated
period
are
displayed
for 4 seconds.
To cancel
timer
standby
mode
temporarily
Press
the TIMER
button
repeatedly
so that
@ or OREC
disappears
on the display.
To restore the timer standby
mode, press again to display
@ or
OREC.
Using
the unit while
the timer
is set
You can use the unit normally
after setting the timer,
Before turning off the power, repeat step 5 to prepare the source,
and adiust the volume
and tone.
Em
Timer playback
and timer recording
will not begin
unless the
power is turned off.
Connected
equipment
cannot be turned on and off by the built-
in timer of this unit,
Use an external
timer.
TIMEIR RECORDING
Timer recording
is applicable
for TUNER
and VI DEO/AUX
(with
an external
timer) sources
only.
SETTING THE SLEEP TIMEFI
The unit can be turned off alJtomatically
at a specified
time,
Use the remote control.
1
Press the SLEEP
button.
2 Within
4 seconds,
press
the -
or P*>
button
to specify
the time until the power
is turnecl off.
Each time the button is pressed,
the time changes
between
!5
and 240 minutes
in 5-minute
steps,
tm
Specified
time
To check
the time remaining
until the power
i!; turned
off
Press the SLEEP
button once,
The remaining
time is displayel~
for 4 seconds,
To cancel
the sleep
timer
Press the SLEEP
button
twllce so that "SLEEP"
on the display
disappears,
Press
the TIMER
button
repeatedly
until
~
REC
appears
on the display,
and press the I I SET button
within
4 seconds.
Carry out the steps of "SETTING
THE TIMER"
from step 2 and
insert the tape to be recorded
into deck 2 after step 5.
Publicidad
