Publicidad
Idiomas disponibles
Idiomas disponibles
CONNECTING
OPTIONAL
EQUIPMENT
LISTENING TO EXTERNAL
SOURCES
CD DIGITAL
(OPTICAL)
VIDEO/AUX
MD
LINE OUT
OUT
Refer to the operating
instructions
of the connected
equipment
for details.
The connecting
cords are not supplied.
Obtain the necessary
connecting
cords,
Consult
your local Aiwa dealer for optional
equipment.
VIDEO/AUX,
MD JACKS
This unit can input analog
sound signals
through
these jacks.
Use a cable with RCA phono plugs to connect
audio equipment
(turntables,
LD players,
MD players,
VCRs, TV, etc.).
Connect
the red plug to the R jack, and the white plug to the L
jack.
When
connecting
a turntable
Use an Aiwa turntable
equipped
with a built-in equalizer
amplifier.
LINE OUT JACKS
This unit can output analog
sound signal through
these jacks.
Use a cable with RCA phono plugs to connect
audio equipment
with LINE IN (analog
input) jacks.
m
Do not connect
an equipment
to the LINE OUT terminals
and
VI DEO/AUX
terminals
simultaneously.
Otherwise,
noise
is
generated
and malfunction
occurs.
CD DIGITAL OUT (OPTICAL) JACK
This unit can output
CD digital sound signals
through
this jack.
Use an optical
cable to connect
digital audio equipment
(digital
amplifier,
DAT deck, MD recorder,
etc.),
Remove
the dust cap @ from the CD DIGITAL OUT (OPTICAL)
jack. Then,
connect
an optical
cable
plug to the CD DIGITAL
OUT (OPTICAL)
jack.
To play equipment
connected
to the VIDEO/AUX
jacks or MD
jacks, proceed
as follows.
1 Press the VIDEO/AUX
or MD button.
When a equipment connected to the VIDEO/AUX jacks is
played:
press the VIDEO/AUX
button.
When a equipment
connected
to the MD jacks is played:
press the MD button.
2 Play the connected
equipment.
To change
a source
name
in the display
When
the VIDEO/AUX
button
is pressed,
VIDEO
is displayed
initially.
It can be changed
to AUX or TV.
With the power on, press the POWER
button while pressing
the
VIDEO/AUX
button.
Repeat the procedure
to select one of the names.
To adjust
the sound
level of the external
source
When the sound
level of the external
source
is much higher or
much
lower
than that of other
function
sources,
adjust
it as
follows.
1
Press the VI DEO/AUX
or MD button and play the equipment.
2
Press the ++
or -
button so that the sound level becomes
the same as that of other function
sources,
m
During
recording,
the sound level can not be adjusted.
When
the CD DIGITAL
OUT (OPTICAL)
jack
is not being
used
Attach the supplied
dust cap.
23
ENGLISH
Publicidad
