Publicidad
Idiomas disponibles
Idiomas disponibles
MONO
TUNER
1 Press the TUNER/BAND
button
repeatedly
to
select the desired band.
FM —
AM
When the TUNEWBAND
button
is pressed
while the power
is off, the power is turned
on directly,
2
Press
the
l<+
DOWN
or F-1 UP button to select
a station.
Each time the button is pressed,
the frequency
changes.
When a station is received, "TUNE" is displayed
for 2 seconds.
During FM stereo reception,
(iI@l}]
is displayed.
To search for a station quickly (Auto Search)
Keep the PM
DOWN or P>l
UP button pressed
until the tuner
starts searching
for a station.
After tuning
in to a station,
the
search stops.
To stop the Auto Search manually,
press the l<<
DOWN or
>1
UP button.
The Auto
Search
may not stop
at stations
with very weak
signals.
When an FM stereo broadcast
contains noise
Press the MONO button on the remote control
so that "MONO"
appears
on the display.
Noise is reduced,
although
reception
is monaural,
MONO
To restore stereo reception,
press the MONO TUNER
button so
that MONO disappears,
To change
the
AM tuning interval
The default
setting
of the AM tuning
interval
is 10 kHz/step.
If
you use this unit in an area where the frequency
allocation
system
is
9
kHz/step,
change
the tuning
interval.
Press the POWER
button
while
pressing
the TUNER/BAND
button.
To reset the interval,
repeat this procedure.
When the AM tuning
interval
is changed,
all preset stations
are
cleared.
The preset stations
have to be set again.
The unit can store a total of :32 preset stations.
(Each band has
a maximum
of 20 available
Ipreset stations. ) When
a station
is
stored, a preset number is assigned
to the station.
Use the preset
number
to tune in to a preset station
directly.
1
2
3
Press the TUNER/BAND
button to .sele(ct a band,
and press the l++
[) OWN or E+!
UP button tc~
select a station.
Press the 11 SET button to store the station.
A station
is assigned
a preset
number,
beginning
from 1 in
consecutive
order for each band.
lFrequency
I
Preset numbsr
Repeat steps f and 2!.
The next station will not be stored if a total of 32 preset stations
for all the bands or a total of 20 preset stations
fm one bancl
have already
been stored.
PRESET NUMBER "TUNING
Use the remote control to select the preset number
directly.
7
Press the TUNER/BAND
button to select a band.
2 Press the numberedl buttons to select a preset
number.
Example:
To select preset number 20, press the +1 O, +10 and O buttons,
To select preset number
15, press the +1 O and 5 buttons.
Selecting a preset number on the main unit
Press the TUNER/BAND
button
to select a band, "Then, Ipress
the
-
DIRECTION/PRESl~T
button repeatedly,
Each time the button
is pressed,
the next highest
number
is
selected.
To clear a preset station
Select the preset number of the station to be cleared. Then, press
the
CLEAR
button,
and press the II
SET button
within
4
seconds.
The preset numbers
of all other stations
in the bancl with higher
numbers
are also decreased
by one.
,EAfGL/!3H ~~
Publicidad
