Network; Wireless Network - Loewe Individual Sound Instrucciones De Manejo

Start-up

Network

Depending on whether the Multiroom Receiver is connected to your home
network by wire (Ethernet, Powerline) or wireless (WiFi), different settings have
to be made.
Press the ROOM button.
  Select required room.
Confirm with OK.
  Select Receiver settings.
Confirm with OK.
 Select option Network.
➠
The Multiroom Receiver automatically recognises whether
there is a wired or wireless network connection and prompts
you to make the necessary settings in menus.

Wireless network

Here you make the settings for a wireless network.
1HWZRUN
66,'
6HDUFKLQJ 
5RRP 
 
First of all, a search is carried out for wireless networks in your
surrounding area.
The wireless networks found are listed.
The network that is currently active is marked blue.
Rescan starts the search again.
WiFi off You can deactivate WiFi (option appears if no LAN
is connected). If required, switch WiFi on by repeating the
network setting.
➠
If your wireless network is encrypted, then it is necessary to
enter the WiFi password that allows access to the network.
➠
Encryption using the standard WEP is no longer considered
safe. If possible, use the standards WPA or WPA2. Please
make the appropriate settings in your WiFi router.
1HWZRUN
66,' !
:(3 66,'!
:3$ 66,'!
5HVFDQ
:L)L RQ
5RRP 
 
 Select required network.
Confirm with OK.
1HWZRUN
3DVVZRUG
 

(3* D]$=
3,3 GHOHWH
5RRP 
 
If the network is encrypted, enter the numbers and letters of the
password using keypad (same as SMS).
Use EPG to switch between upper/lower case.
Use PIP to delete characters to the left of the cursor.
OK Save.
➠
The WiFi password must have a minimum of 8 characters
and a maximum of 64 characters.
➠
If you do not know the WiFi password, contact your network
administrator.
➠
Supported encryption types: page 47.
1HWZRUN
:(3 NH\
,QGH[ 
,QGH[ 
,QGH[ 
,QGH[ 
5RRP 
 
If the selected wireless network works with WEP encryption, in
the pop-up menu, a location still needs to be selected for the
password in "Index 1-4".
 Select required Index.
Confirm with OK.
➠
Afterwards, the settings still have to be made as described
under "Wired Network" (page 36).
35 -