Update; Software Status And Update; Software Update Via Usb/Internet - Loewe Individual Sound Instrucciones De Manejo

Update

Software status and update

The Multiroom Receiver can, if required, be updated by your specialist retailer
through a software update.
Press the ROOM button.
  Select Room. Confirm with OK.
  Select Receiver settings.
Confirm with OK.
  Select Software.
Confirm with OK.
6RIWZDUH
8SGDWH
([LW
9HUVLRQ
'DWH

5RRP 
 
The version number and date of the current software version
are shown.
  Select the option Exit.
Confirm with OK.
Y

Software Update via USB/Internet

In case of an update via USB: Insert the USB stick with the update
file "update.pac" in the root directory in the USB jack on the side
(page 28) of the Multiroom Receiver.
Press the ROOM button.
  Select Room. Confirm with OK.
  Select Receiver settings.
Confirm with OK.
  Select Software.
  Select the option Update.
  Select the option USB or Internet.
Confirm with OK.
6RIWZDUH
8SGDWH
:ULWLQJ UPZDUH
:KHQ 0XOWLURRP
5HFHLYHU /(' LV
*5((1 RQO\ VZLWFK
UHFHLYHU R DQ RQ
5RRP 
 
The software update starts. The red LED flashes.
The process can take up to 30 minutes.
As soon as the LED in the Multiroom Receiver once again
glows green continuously (with no red), switch off the unit with
the mains switch and then on again.
➠
The unit must not be disconnected from the mains during the
update process.
➠
Please also check whether there is a software update avail-
able for the remote control Assist Media (see the operating
manual for Assist Media). If a software update for Assist
Media is necessary, a corresponding message appears in the
display unit.
45 -