Zoom H1n Manual De Operación página 20

Recording
Adjusting input levels
Adjusting levels manually
1.
Turn the input volume dial.
HINT
• Adjust so that the peak level stays around −12dB.
• If the sound distorts even when you lower the input level, try changing mic positions and adjusting the output
levels of connected devices.
• To cut noise from wind and other sources during recording, see
• To stop input signal clipping, see
NOTE
If the REC LED is blinking, the sound could be distorted, so lower the input level.
"Setting the limiter".
18
"Reducing noise".