Publicidad
Idiomas disponibles
Idiomas disponibles
TABLAS · TABLES · TABELAS ·
El ventilador oscila mientras está
en movimiento.
Problem
The remote control does not work
and the wall switch is not working
either.
The remote control does not work,
but the wall switch does (light)
The fan is working but the light
does not turn on.
The
fan
swings
connected and moving.
14
Asegúrese
correctamente.
Puede que se haya creado un desnivelamiento del
ventilador. Utilice el kit equilibrio de aspas para
solucionarlo.
Change the batteries in the remote.
Check the electrical connections. The installation
may be faulty.
The problem might be the receptor, please contact
our Technical Service.
Change the batteries in the remote control
The remote control has deprogrammed itself. You
can reprogram the remote control following these
steps:
• Step 01-A: Set the power supply to the off
position
• Step 02-B: Press again the wall switch to the
on position, so that there is power supplied to
the fan.
• Step 03-C: You must then press the button
sequence: Summer Mode - All Off - Summer
Mode, within 3 seconds. The fan will emit a
long beep to confirm that your controller has
been successfully paired.
• Step 04-D: Finally press the light button on the
remote and check that the light in your fan
turns on.
The light has burnt out. Contact us to purchase the
spare parts.
when
it´s
Make sure the assembly was done correctly.
The fan is uneven. Use the fan blade balancing kit
to solve it.
que
realizó
en
Possible solution
ensamblaje
Publicidad
