Publicidad
Idiomas disponibles
Idiomas disponibles
• Check the speed and light (if your
model has it)
Using the product with the switch and
the remote controller:
• You cannot control speed with the wall
switch. The wall switch only allows
you to turn it on. Speed can only be
selected with the remote controller.
• You can use the switch to turn on/off
the light. Depending on your model,
light:
• Will automatically turn on when
you press the switch.
• Turn the light on with the remote
controller and then press the switch.
The light will turn off and the settings
will be saved for the next time you
use it. You can check these settings
by pressing the switch again.
Winter function:
This option involves reversing the blades
to distribute the hot air that accumulates
against the ceiling, allowing continued use
of your fan throughout the year.
To activate the winter function, press
the remote control button previously
mentioned above.
WiFi. Smartphone:
This model has WiFi function, so you
can control it using your mobile phone
(smartphone)
Follow the instructions included in the
user manual "APP connect manual" to
install the app and control the device.
Remember your mobile device must be
connected to the local WiFi network to be
able to connect with your new ceiling fan.
CLEANING AND MAINTENANCE
This product does not require a great deal
of maintenance. To clean, please follow the
instructions below:
• Unplug the fan first and wait until it
comes to a complete stop.
• Use only a soft damp cloth.
• Do not use abrasive cleaners.
• If you are not going to use the fan
for some time, it is recommended to
remove the batteries from the remote
control and store it in a clean and dry
place.
TROUBLE SHOOTING
Occasionally you can solve yourself some
failures in your appliance. Check the
Problem-Solution chart included in this
manual. See table 02 on page 13.
Otherwise, please contact our Customer
service.
If you notice any failure you cannot fix
yourself and it´s preventing you from using
the appliance, disconnect it from the power
supply.
Any repairing intervention or
replacement of electrical cables
must be carried out by a skilled
and
Otherwise it could be very
dangerous.
Reprogramming the remote controller:
Once you have finished the installation,
assembly and electric connection of your
fan, check that the remote control interacts
correctly with the fan, if it does not it is
possible that the remote controller needs
to be reset.
To reset your remote controller, please
follow these steps:
• Step 01-A: Set the power supply to the
off position
• Step 02-B: Press again the wall switch
to the on position, so that there is power
supplied to the fan.
• Step 03-C: You must then press the
button sequence: Summer Mode - All
Off - Summer Mode, within 3 seconds.
The fan will emit a long beep to
confirm that your controller has been
competent technician.
EN
37
Publicidad
