Be Cool BC18STTIDC Instrucciones De Uso página 134

Preparation
•
Estimated assembly time: 30 minutes
•
Required tools for assembly: Phillips screwdriver (not included).
Assembly
After unpacking, first check the condition of
the fan chassis and whether there are any
defects. First remove the screw at the
bottom of the short connecting rod, insert
the short rod into the chassis and fix it
together with the screw (Fig. 1).
Alternatively, insert the short rod into the
chassis and connect it to the long rod, also
fix the long rod with the screw (Fig. 2).
Note: When assembling and
disassembling, the connecting tube should
be screwed down to prevent damage to
the motor. The vertical swivel function
cannot be adjusted manually to avoid
damage to the swivel structure.
Using the remote control
•
After taking the remote control out of the packaging, remove the battery
cover and insert 2 AAA batteries to use it directly.
•
When using the remote control, the transmitter of the front part of the
remote control must be aligned with the reception window of the product.
Note: The reception window is located on the front of the housing, above
the button
•
The remote control can normally be used at a distance of about 3-5
metres from the front of the product and within a range of 30 degrees.
•
Avoid direct sunlight on the reception window so as not to impair the
reception effect.
•
Store the remote control safely to avoid shocks and falls.
•
When inserting the battery, pay attention to the correct polarity. Never
insert the wrong way round. (Use 2 AAA batteries)
Fig. 1
134
Fig. 2