Publicidad
Idiomas disponibles
Idiomas disponibles
Screw hole
cover
Screw hole
cover
4.4. REVERSE THE DOOR SWING
Tools required:
Cross-head
screwdriver
5/16" socket and
ratchet (if required)
Masking tape (if
required)
Note: The above tools are not supplied.
1.
Power off the refrigerator.
2.
Dismantle the screw hole caps, screws and handle, and remove the plastic screw
hole caps from the other side.
3.
Dismantle the upper hinge cover, screws and upper hinge, and remove the
hole cover from the other side. Unplug the wiring connector on the right side of
refrigerator top (
,
wiring connector).
13
Screw hole
Screw
Thin-blade screwdriver
Putty knife (if required)
EN
Publicidad
