Heathrow Scientific Digital Vortexer Manual De Instrucciones página 11

Operation
1. Remove the contents from the package examining them carefully
for breakage, defects or missing parts.
2. Place the product on a clean sturdy, level surface at least 12" (30
cm) away from the edge of the counter and other moving equip-
ment. Make sure the AC power adapter and cords are clear of
hot surfaces and other hazards. Ensure no person or hazardous
substances are within a 24" zone around the product.
3. Make sure the product has ventilation and is not encased in any
material that will limit airflow. An overheating situation could occur.
4. Position product so that it is easy to disconnect from mains outlet.
5. Plug the DC cord into the rear of the unit and the AC cord an
approved outlet.
6. ONLY use Heathrow supplied power cord and adapter.
7. Do not unplug unit is in motion.
Prior to every use:
— Inspect unit for cracks, missing pieces, and or any damage that
would result in an impaired performance and notify manufacturer
BEFORE use.
— Make sure the power switch on the rear of the unit is set to "O"
which stands for "OFF".
v5.24
11