Dimplex TDS8515 Manual Del Usuario página 12

4. Remove the burnt out bulb(s)
by pulling straight out of
socket. If bulbs are difficult to
remove from socket move the
bulb from side to side while
pulling being careful not to
damage the light socket.
5. Replace the lower light bulbs.
6. Reassemble in the reverse
order as above.
Glass Cleaning
The glass is cleaned in the
factory during the assembly
operation. During shipment,
installation, handling, etc., the
clear door may collect dust
particles; these can be removed
by dusting lightly with a clean dry
cloth.
To remove fingerprints or other
marks, the clear door can be
cleaned with a damp cloth. The
clear door should be completely
dried with a lint free cloth to
prevent water spots.
CAUTION: Do not use
abrasive cleaners on glass
surface or spray liquids directly
onto any surface.
Stove Surface Cleaning
Use a cloth dampened with
warm water only to clean painted
surfaces of the electric stove. Do
not use abrasive cleaners.
12
Figure 5
Lower Light
Bulbs (3)
Figure 6
Screws
Screws
Upper
Light Bulb
www.dimplex.com