Descargar Imprimir esta página

Craftsman 82312 Manual Del Usuario página 21

Ocultar thumbs Ver también para 82312:

Publicidad

Idiomas disponibles

Idiomas disponibles

J WARNING:
To avoid electric shock, disconnect
the test leads
from any source of voltage before removing the back cover or
the battery or fuse covers.
I
ARNING:
To avoid electric shock, do not operate your meter
until the battery and fuse covers are in place and fastened
securely.
This MultiMeter is designed to provide years of dependable
service,
if the following care instructions
are performed:
1.
KEEP THE METER DRY. If it gets wet, wipe it off.
2.
USE AND STORE THE METER IN NORMAL
TEMPERATURES.
Temperature extremes can shorten
the life of the electronic parts and distort or melt plastic
parts.
3.
HANDLE THE METER GENTLY AND CAREFULLY.
Dropping it can damage the electronic parts or the case.
4.
KEEP THE METER CLEAN, Wipe the case occasionally
with a damp cloth. DO NOT use chemicals, cleaning
solvents, or detergents.
5.
USE ONLY FRESH BATTERIES
OF THE
RECOMMENDED
SIZE AND TYPE. Remove old or
weak batteries so they do not leak and damage the unit.
6.
IF THE METER IS TO BE STORED FOR A LONG
PERIOD OF TIME, the battery should be removed to
prevent damage to the unit.
I[olvlVll :yzlu innl =1 r,b"dl I#Im] [ o,7zlu
nl [ o],'
I
ARNING: To avoid electric shock, disconnect the test leads from
any source of voltage before removing the battery cover. Do not
operate meter unless the battery is in place.
LOW BATTERY INDICATION
The _ icon will appear in the lower left-hand corner of the
display when the battery voltage becomes low. Replace the
batteries when this appears.
I
21

Publicidad

loading