Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION BY REMOTE CONTROLLER:
The Herschel CALIFORNIA is operated from the remote control supplied with the heater.
Insert 2 x AAA Alkaline batteries into the remote control.
All Herschel remote controls have the same frequency, so it is possible to control several heaters with just
one remote.
Safety & Energy-saving protection:
•
If the California 2000R is left switched on continuously for a week (168 hours), the heater will
automatically switch itself off and must be restarted.
California 2000R is equipped with an overheat switch which will cut power to the heater if it senses an
•
overheat in the electronics. Please let the heater cool down for 15 minutes before attempting to
restart.
INITIAL USE:
There may be an odour or vapour from the heater on initial use or if heater has not been used for an
extended period. This is normal.
USER MAINTENANCE:
The heater may be wiped-down with a soft damp cloth. Do not use abrasive detergents to clean the unit. In
marine environments, the unit may be gently sprayed clean with clean water with the POWER TURNED OFF
and completely cool. After cleaning, it is advisable to warm the heater for 10 – 20 minutes to dry the unit
and prevent staining.
The lamp used in the Herschel CALIFORNIA is Ultra long life (up to 10,000 hours). Changing the lamp should
only be carried out by suitably qualified personnel using the instructions available on Herschel's website.
Button
Function (Heater On)
1
Turns heater on or off
2
Increase Heat Level or
Timer hours
3
Decrease Heat Level or
Timer Hours
4
Enable Timer
adjustment
5
Enable Heat Level
adjustment
Remote Control Function
Function (Heater Off)
Turns heater on to
Level 1 (minimum)
Turns heater on to
Level 2 (Maximum)
1.
ENGLISH
LED Display on
Heater
L1
L2
00 - 24
L [n]
Publicidad
