AERMEC FCW 222V Manual De Uso E Instalación página 41

TURN ON PROGRAMMED BY THE TIMER
1) TURN ON WITH OR
– Set the required conditions (MODE, FAN, TEMP) on the remote control that you want
active when starting the unit.
– Turn off with keys
or
2) ACTIVATE THE TIMER ON WITH
3) SET THE TIMER ON WITH
– The key with the symbol
– The key with the symbol
The display only shows the hours the unit remains off before the unit is turned on,
TLW2 from 1 to 18 hours,
PLW2 from 1 to 24 hours,
The number is updated every hour until the unit turns on.
At the time of switching on the unit:
- a beep indicates that the unit has started
- the display will show the conditions previously chosen in point 1)
At the time the unit is programmed to come on, the fan may not come on:
- because the space temperature is already within the programmed parameters
- because the temperature of the water is not appropriate for the operation mode
required
- because during the programmed standby hours the unit's power went down.
4) PRESS THE SET OR TIMER KEYS TO CONFIRM THE TIMER
5) PRESS THE SEND KEY (TLW2)
To transmit the new parameters shown on the LCD to the remote control.
TO CANCEL THE TIMER SETTING
- TLW2: Press the key to cancel the timer setting
- PFW2: Press the TIMER key for 3 seconds to cancel the timer setting.
- Press the or key to manually turn ON the unit while the timer is pro-
grammed.
TURN OFF PROGRAMMED BY THE TIMER
1) TURN ON WITH OR
– Set the conditions (MODE, FAN, TEMP) on the remote control
2) TO ACTIVATE THE TIMER OFF WITH
3) SET THE TIMER OFF WITH
– The key with the symbol
– The key with the symbol
The display shows the operating mode and the programmed running hours before the
unit is turned off,
TLW2 from 1 to 18 hours,
PLW2 from 1 to 24 hours,
The number is updated every hour until the unit turns off.
Before the programmed turn off a beep will be emitted from the unit.
At the time the unit is programmed to turn off the unit may not switch off if the power
has been interrupted during the programmed running time.
4) PRESS THE SET OR TIMER KEYS TO CONFIRM THE TIMER
5) PRESS THE SEND KEY (TLW2)
To transmit the new parameters shown on the LCD to the remote control.
TO CANCEL THE TIMER SETTING
- TLW2: Press the key to cancel the timer setting
- PFW2: Press the TIMER key for 3 seconds to cancel the timer setting.
- Press the or key to manually turn OFF the unit and the timer programme is
c a n - celled.
KEYS
OR KEYS
OR KEYS
allows increases of 1 hour
allows decreases of 1 hour
KEYS
OR KEYS
OR KEYS
allows increases of 1 hour
allows decreases of 1 hour
TLW2
PFW2
TLW2
PFW2
41