Publicidad
Idiomas disponibles
Idiomas disponibles
Google Play Store
1. Download and install the AX-DSP-XL app from the Google Play Store or Apple App Store.
2. Turn Vehicle Ignition on. Make sure the Remote Turn on lead is disconnected.
3. Open the app: Select Bluetooth Connections page.
Select Scan, all available AXDSP devices within range will be displayed.
•
Select your AXDSP and hit connect. (Figure A)
4. Select the Configuration page.
•
Select Vehicle Type Icon
Apple App Store
•
Select the Vehicle Make: ________
iOS 12.1 or higher
•
Select the Vehicle's model: ________
•
Select With OE Amp
•
Hit Apply (Figure B)
5. Make sure radio volume is all the way down.
6. Connect the amp turn-on wire from the AXDSPX-GMM50 harness to the
aftermarket amplifiers.
(Figure A)
QUICK SETUP STEPS THROUGH AX-DSP-XL APP
(Figure B)
7. From the Configuration page click the Identify button to confirm that the
AXDSPX-GMM50 is connected properly. If so, a chime will be heard from the front
left speaker.
8. Press the Lock Down button to save the configuration. (Do not turn ignition off
until this process is completed) (Figure C)
9. Select the Bluetooth Configurations page and disconnect the DSPX.
10. Turn ignition off, close all door then lock vehicle using the key fob. The vehicle
will need to sit uninterrupted for 10 minutes while the vehicle goes to sleep.
(Make sure Key fob is 15 feet away from the vehicle)
11. Unlock Vehicle, turn ignition on and test radio's functions.
12. Adjust the DSP settings in the app as desired. Refer to the instructions under the
Setup Instructions tab, or online at
each tab in the app.
Locking Down Data
(Figure C)
Last and the most important:
You MUST lock down your configuration and cycle the key!!!
Axxessinterfaces.com
for an explanation of
REV. 5/3/24 INSTAXDSPX-GMM50
5
Publicidad
