Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
1
Preparing for installation
□ Disconnect power at the source prior to attempting to
install or service the light string.
□ Use only with 120 V AC receptacles.
□ Before powering the string light, inspect bulb and socket.
Turn the bulb slowly, yet firmly, clockwise, relative to the
socket, to ensure a secure fit of the bulb.
2
Attaching the controller to the
string light
□ Locate the female connector on the end of the 1-button
controller (B). On the string light (A), locate the 3-prong
male connector, and join the two ends. Once connected,
secure the connector cap CLOCKWISE into place over the
receiving connector.
□ After inspecting the bulbs, cover the female connector at
the end of the light string set with its cap.
□ Plug-in the 3-prong AC connection to any compatible GFCI
outlet. The red indicator light on the controller will turn on,
and all bulbs should light in their default settings.
5
Please contact 1-877-592-5233 for further assistance.
A
B
HOMEDEPOT.COM/HUBSPACE
Publicidad
