Sony SDM-S205FB Guía De Instalación Rápida página 4

Setup
Unpacking
Make sure your carton contains everything
listed below.
• LCD display
• Power cord
• Stand Base
• HD15-HD15 video signal cable (analog
RGB)
• DVI-D video signal cable (digital RGB)
• Audio cord (stereo miniplug)
• USB cable
• CD-ROM (utility software for Windows/
Macintosh, Operating Instructions, etc.)
• Warranty card
• This Quick Setup Guide
The contents with
vary depending on the models. For details,
see "Specifications."
Connecting your
display
Connect your display to a computer or other
equipment.
• Turn off the display, computer, and
any other equipment before
connecting them.
• Do not touch the pins of the video
signal cable plug.
1
Assemble the stand.
Do not press the LCD screen when
placing or raising the display straight on
a desk or a like.
It may affect the uniformity of the screen
or damage the LCD display.
Refer to an enclosed instruction,"Assemble
the stand," for assembling the stand.
2
Slide down the connector cover.
4
(US)
Downloaded from:
mark for specifications
https://www.usersmanualguide.com/
3
Tilt the display up.
And then move the display's
angle higher.
4
Connect your display to a
computer.
Connecting a Macintosh computer
Connect the supplied video signal cable to a
video output connector on the computer. If
necessary, use an adapter (not supplied).
Connect the adapter to the computer before
connecting the video signal cable.
5
Connect the supplied power cord
securely to the display's AC IN
connector.
6
Connect the other end securely to
a power outlet.
to the DVI-D
input connector
(digital RGB)
AC IN
DVI-D video signal
cable
(digital RGB)
(supplied)
5
to AC IN
to power outlet
6
power cord (supplied)
to the HD15
input connector
(analog RGB)
INPUT 1 INPUT 2
DVI-D 1 HD15 2
4
HD15-HD15
video signal
cable
(analog RGB)
(supplied)