LiftMaster Wall Mount Wi-Fi 98032 Guia Del Usuario página 8

Programming
893MAX Remote Control
Below are the steps to program a new or existing remote
control. Test remote control before reprogramming.
1. Press and hold the program button on the remote
control until the LED on the front of the remote control
turns on.
2. Press and release the remote control button you wish
to use.
3. Press any remote control button except the button that
was just programmed.
4a. Select Menu > Program > Remote and follow the on
Program
Program
screen prompts.
button
button
OR
4b. Press and release the LEARN button on the garage door
opener. The Learn LED will light. Within 30 seconds...
5. Press the remote control button programmed in step 2
until the garage door opener light flashes or two clicks
are heard.
To program other types of remote controls or keyless
entries see the instructions included with the device or visit
LiftMaster.com.
1
1
2
2
4a 4b
4a 4b
Menu > Program >
Menu > Program >
Remote
Remote
5
5
8
LED
LED
Visor
Visor
clip
clip
OR
OR
Visor Clip
Visor Clip
3
3
LEARN LED
LEARN LED
Wireless Keypad
Refer to the instructions provided with your keyless entry
or go to LiftMaster.com to download instructions.
To Erase the Memory
Erase ALL Remote Controls and Keyless Entries
Press and hold the LEARN button until the LED goes out
(approximately 6 seconds).
All remote controls and keyless entries are now erased.
Erase ALL Devices (Including myQ enabled accessories)
1. Press and hold the LEARN button until the LED goes out
(approximately 6 seconds).
2. Immediately press and hold the LEARN button until the
LED goes out. All codes are now erased.
Erase the Wi-Fi Network from the Garage Door Opener
Press and hold the adjustment button until 3 beeps are
heard (approximately 6 seconds).
Erase a myQ Account
Go to myLiftMaster.com to delete your myQ account.
LEARN
LEARN
Button
Button
LEARN Button
LEARN Button
For the complete manual visit LiftMaster.com/Customer-Support
Adjustment
Adjustment
Button
Button