Publicidad
Idiomas disponibles
Idiomas disponibles
Programming
Program the myQ LED Remote Light
myQ Remote LED Light must be installed to enable use of
Timer To Close or myQ Smartphone Control of the door.
Your garage door opener remote light has already been
programmed at the factory to operate with your opener.
Any additional or replacement remote lights will need to be
programmed.
1. Press the LEARN button on the light until the green LED
comes ON.
2. Press the LEARN button on the garage door opener.
OR
On the Smart Control Panel, go to Menu > Program >
myQ Device.
3. The code has been programmed when the remote light
blinks once.
NOTE: The LED light is very bright and will blink while
programming. DO NOT stare at the light while on a ladder.
LEARN Button
LEARN Button
OR
HomeLink
®
In the rare case the HomeLink system does not program
with the Security+ 2.0 Garage door opener, install a
repeater kit. Refer to HomeLink Instructions Below.
HomeLink is the in-vehicle system. The image used is for
reference only and your product may look different.
WHEN TO INSTALL A HOMELINK REPEATER KIT
All 2006 and Older vehicles – A repeater kit is required and
must be purchased by the homeowner.
All 2007 and Newer vehicles – Program the HomeLink
according to the vehicle instructions. If after ONE attempt
to program the HomeLink to the garage door opener and
you are unsuccessful, install a repeater.
HOW TO ORDER
Order the HomeLink repeater kit from an installer or call
1-800-355-3515. To program the HomeLink repeater kit,
refer to the instructions provided in the kit or visit:
http://www.homelink.com/program.
INSTALLATION QUICK FACTS
• Only one repeater kit is required per home.
• Use different HomeLink buttons in vehicle if programming
multiple cars, button 1 first car, button 2 second car...
etc.
• HomeLink remote is NOT a garage door opener.
• If you are using the HomeLink repeater with a garage
door opener that has a battery backup system, ensure
your original garage door opener remote control is
programmed to the garage door opener and place it in
your glove box for use in the event of a power outage.
• The remote included in this repeater kit MUST be kept
for future programming (new vehicle, new garage door
opener etc).
HomeLink
Opener/Operator
LEARN Button
I
II
Door
®
III
Repeater Kit
LEARN Butto
880LMW
OR
9
Publicidad
