Descargar Imprimir esta página

De Dietrich DFP8363A Manual De Instrucciones página 187

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 196
6
CARE
If necessary, remove them to clean
them.
Do not soak the glass panels in water.
Rinse with clean water and dry off with a
lint-free cloth.
After cleaning, reposition the four rubber
stops with the arrow upwards and
reposition all of the glass panels.
Insert the last glass panel into the metal
stops, then clip it in with the side with
«PYROLYTIC» facing you and legible.
Remove the plastic wedge.
Your appliance is now ready for use
again.
DISASSEMBLY AND REASSEMBLY
OF THE "SENSOR" PLATE
You can dismantle the "SENSOR" plate
indicating the presence of a humidity
sensor linked to the CHEF mode as it
is not essential for operation. Use the
plastic wedge supplied to dismantle the
door glass.
Disassembly :
Slide the plastic wedge between the
"SENSOR" plate and the top of the oven
and make a downward movement to
unclip it.
Reassembly :
Grasp the "SENSOR" plate and firmly
insert the notches
corresponding slots upwards.
26
A
into the

Publicidad

loading