Tectro TP 3020 Instrucciones De Uso página 66

DRY operation
- Press the "MODE" button until the "DRY" indicator light comes on.
- The fan speed or the temperature cannot be adjusted. The fan motor operates
at LOW speed.
NOTE:Keep windows and doors closed for the best dehumidifying effect. Do not
put the duct to window.
FAN operation
- Press the "MODE" button until the"FAN " indicator light comes on.
- Press the "FAN SPEED" button on the remote controller to choose the fan speed.
The temperature can not be adjusted.
- Do not put the duct to window.
AUTO operation
When you set the air conditioner in AUTO mode, it will automatically select coo-
ling, heating(cooling only models without), or fan only operation depending on
what temperature you have selected and the room temperature.
- The air conditioner will control room temperature automatically round the
temperature point set by you.
- Under AUTO mode, you can not select the fan speed.
NOTE: Under AUTO mode, both the AUTO mode and the actual operation mode
indicator lights illuminate for some models.
Other features
SLEEP
This feature can be activated from the remote control ONLY. To activate SLEEP
feature, the set temperature will increase(cooling) or decrease(heating) by
1°C/2°F (or 1°F) in 30 minutes. The set temperature will then increase(cooling) or
decrease(heating) by another 1°C /2°F (or 1°F) after an additional 30 minutes. This
new temperature will be maintained for 7 hours before it returns to the originally
selected temperature. This ends the Sleep mode and the unit will continue to ope-
rate as originally programmed.
NOTE: This feature is unavailabe under FAN or DRY mode.
AUTO-RESTART
If the unit breaks off unexpectedly due to the power cut, it will restart with the
previous function setting automatically when the power resumes.
AIR FLOW DIRECTION ADJUSTMENT
Adjust the air flow direction manually:
- The louver can be set to the desired position manually.
- Do not place any heavy objects or other loads on the louver, doing so will cause
damage to the unit.
- Ensure the louver is fully opened under heating operation.
- Keep the louver fully opened during operation.
WAIT 3 MINUTES BEFORE RESUMING OPERATION
After the unit has stopped, it can not be restarted operation in the first 3 minutes.
4
66