Publicidad
Idiomas disponibles
Idiomas disponibles
Problem
Remote control
The remote control does
not respond.
Shower functions
Switching between the
Rearwash and Frontwash
takes too long.
The water spray intensity
is too weak.
The water temperature is
too high/low.
The Rearwash/Frontwash
stops automatically.
32
Potential cause
The batteries are
almost flat (LED
display flashes white).
The remote control is
not connected to the
product (LED on the
top of the remote
control flashes red).
No batteries are
inserted.***
The remote control is
defective.
The spray wand
retracts between the
functions. Switching
takes approx.
12 seconds.
The water spray inten-
sity is set to "low".
The water pipe is bent
or crushed.
The temperature is set
incorrectly.
The function stops
automatically after
2 minutes.
The seat sensor has
lost contact.
Solution
> Replace the batteries or
charge the remote control.
> Activate the pairing mode
for the remote control.
> Insert the batteries.
> Contact help@duravit.com.
Normal condition
> Increase the water spray
intensity.
[}App] Home – Rearwash/
Frontwash
> Contact help@duravit.com.
> Set the temperature.
[}App] Home – Rearwash/
Frontwash
Normal condition
> Sit down again.
> Activate the function.
Publicidad
