Publicidad
Idiomas disponibles
Idiomas disponibles
For all grounded, cord connected products:
Grounding instructions
This product should be grounded. In the event of an electrical short
circuit, grounding reduces the risk of electric shock by providing an
escape wire for the electric current. This product is equipped with a
cord having a grounding wire with a grounding plug. The plug must
be plugged into an outlet that is properly installed and grounded.
DANGER
Improper use of the grounding plug can result in a risk of electric
shock.
> If repair or replacement of the cord or plug is necessary, do NOT
connect the grounding wire to either flat blade terminal. The
wire with insulation having an outer surface that is green with or
without yellow stripes is the grounding wire.
> Check with a qualified electrician or serviceman if the grounding
instructions are not completely understood, or if in doubt as to
whether the product is properly grounded.
This product is for use on a nominal 120 V circuit, and has a
grounding plug that looks like the plug illustrated in sketch A in
Figure below. A temporary adapter, which looks like the adapter
illustrated in sketches B and C, may be used to connect this plug to
a 2-pole receptacle as shown in sketch B if a properly grounded
outlet is not available. The temporary adapter should be used only
until a properly grounded outlet (sketch A) can be installed by a
qualified electrician. The green colored rigid ear, lug, and the like
extending from the adapter must be connected to a permanent
ground such as a properly grounded outlet box cover. Whenever the
adapter is used, it must be held in place by the screw.
9
Publicidad
