Levenhuk Wezzer PLUS LP150 Guia Del Usuario página 12

Idiomas disponibles

Setting up Wi-Fi and weather server connection

• An active 2.4GHz Wi-Fi network is required.

ATTENTION! The weather station provides regular transmission of current readings to the WeatherUnder-

ground (https://www.wunderground.com) and Weathercloud (https://weathercloud.net) servers, with a stable

Internet connection and the appropriate settings. To use this function, you must register the weather station

on the aforementioned sites by creating a personal account (free) and receiving a weather station ID and

access key. Both weather servers allow you to receive current weather data from your weather station in real

time and view historical data from any part of the world via the Internet.

• Press and hold the BARO/–/

entered the Access Point mode (AP) and is ready to set up Wi-Fi connection.

• Use your smartphone, tablet, or computer to complete the following steps:

– Open the Wi-Fi settings on your PC or Android/iOS device. To do so, go to settings and select Wi-Fi settings.

– Locate the weather station SSID from the list. It should appear as WWS-XXXXXX (where all the X's are integers) in the

list. Tap on the SSID to connect.

– Once you are connected to the weather station, open up your internet or mobile web browser, and enter the following

address into the address bar: http://192.168.1.1 to access the weather station web interface. (Make sure to include the

http:// or else the web browser may interpret the address as a search query.)

– In the web-interface, fill out the required information in the SETUP tab. Make sure all information is entered correctly

before saving. If you do not plan to use Wunderground.com and/or Weathercloud.net, remove the corresponding checks.

button for 3 seconds. The station's LCD screen will show the AP icon to signify it has

82875