Levenhuk Wezzer PLUS LP150 Guia Del Usuario página 13

Weather station web-interface (SETUP tab)
1 UI language select
2 Select from a list of available Wi-Fi networks (SSID)
3 Your Wi-Fi network password
4 WeatherUnderground server station ID
5 WeatherUnderground server station key/password
6 WeatherUnderground upload confirmation
7 Weathercloud server station ID
8 Weathercloud server station key/password
9 Weathercloud upload confirmation
10 Time zone selection
11 Time sync server selection
12 APPLY button
ATTENTION! To automatically synchronize the time in your time zone, change the time zone setting in the
TimeZoneSetup section of the SETUP tab. The default is "+0:00". You must specify your time zone. If daylight
saving time is in effect for your country, activate the corresponding checkbox.
– Press APPLY to save the information filled in this tab.
ATTENTION! The ADVANCED tab contains options for calibrating sensors, but this requires specialized knowl-
edge. In daily operation of the weather station, it is not recommended to independently calibrate most sensors,
with the exception of relative pressure indicators, which strongly depend on altitude above sea level.
• To finish setup press and hold the BARO/–/
Access Point (AP) mode and connect to your Wi-Fi network with all your changes saved.
• Wi-Fi connection status is displayed on the LCD screen. Flashing
to connect to the router. Missing
icon means stable connection to your network.
Weather station basic setup
• Press and hold the SET button, to begin configuration. Beep ON will blink on the LCD screen.
• Press WIND/+ or BARO/–/
• Press SET to confirm and move on to the next setting.
Basic settings order: Sound signal on/off > NTP server on/off > Language > Time zone > Daylight saving time (DST) on/off
> Date format > Year > Month > Date > 12/24 hours > Time (hours) > Time (minutes) > Temperature Units > Pressure Units
> Relative Pressure Calibration > Light Intensity Units > Precipitation Units > Wind Speed Units > Hemisphere > End Setup
(Return to Normal Mode).
ATTENTION! 8 languages are available for displaying the day of the week: ENG (English), GER (German), FRE
(French), SPA (Spanish), ITA (Italian), DAN (Danish), DUT (Dutch), RUS (Russian).
After 20 seconds of inactivity, the setting mode will automatically switch to normal mode. To exit settings press the
(Backlight/Snooze) button.
Clock setup
• In normal mode, press and hold the SET button for 3 seconds, to enter time setup mode. To change values, use WIND/+
or BARO/–/ buttons.
Time setting order: Hours > Minutes > Quit time setup mode.
• Hold WIND/+ and BARO/–/
• Press SET to confirm and move on to the next setting.
button on the weather station for 3 seconds. The station will exit the
icon means the weather station is not connected to a Wi-Fi router. Constantly on
to turn button sound on or off.
for 2 seconds to quickly scroll through the values.
icon means unstable Wi-Fi signal or active attempts
13