Qilive Q.6341 Manual De Instrucciones página 19

5.4. CHANGING THE PROGRAM MID-CYCLE
A programme can only be changed if it has been running only for a short period of time, otherwise
the detergent may have already been released or the the wash water with detergent has already
been drained. If this is the case, the dishwasher needs to be reset and the detergent dispenser
must be refilled. To reset the dishwasher, follow the instructions below:
1. Press the Start/Pause button to pause the washing.
2. Press Program button for more than 3 seconds the machine will be in program selection
mode.
3. Press the Program button to select the desired program.
4. Press the Start/Pause button, after 1 seconds, the dishwasher will start.
3 sec
5.5. FORGET TO ADD A DISH?
A forgotten dish can be added any time before the detergent dispenser opens. If this is the case,
follow the instructions below:
1. Press the Start/Pause button to pause the washing.
2. Wait 5 seconds then open the door.
3. Add the forgotten dishes.
4. Close the door.
5. Press the Start/Pause button after 10 seconds, the dishwasher will start.
After 5 sec
WARNING:
It is dangerous to open the door mid-cycle, as hot steam may scald you.
5.6. AUTO OPEN
After washing, the door will open automatically to achieve better drying effect.
NOTE:
■ The dishwasher door must not be blocked when set to open
automatically.
■ This can disrupt door lock functionality.
6. INSTALLATION INSTRUCTION
WARNING:
Electrical Shock Hazard
Disconnect electrical power before installing dishwasher.
Failure to do so could result in death or electrical shock.
19
EN