Qilive Q.6341 Manual De Instrucciones página 21

How to disconnect the safety supply hose
1. Turn off the water.
2. Unscrew the safety supply hose from the faucet.
6.3. CONNECTION OF DRAIN HOSES
Insert the drain hose into a drain pipe with a minimum diameter of 4 cm, or let it run into the sink,
making sure to avoid bending or crimping it. The height of drain pipe must be less than 600 mm.
The free end of the hose must not be immersed in water to avoid the back flow of it.
Please securely fix the drain hose in either position A or position B
Back of dishwasher
Back of dishwasher
Mains Cable
Mains Cable
How to drain excess water from hoses
If the connection to the drain pipe is positioned higher than 1000 mm, excess water may remain
in the drain hose. It will be necessary to drain excess water from the hose into a bowl or suitable
container that is held outside and lower than the sink.
Water outlet
Connect the water drain hose. The drain hose must be correctly fitted to avoid water leaks. Ensure
that the water drain hose is not kinked or squashed.
Extension hose
If you need a drain hose extension, make sure to use a similar drain hose.
It must be no longer than 4 meters; otherwise the cleaning effect of the dishwasher could be
reduced.
Drain Pipe
Drain Pipe
A
B
Drain pipe
Drain Pipe
Inlet pipe connector
Inlet pipe connector
Drain pipe
Drain pipe
21
EN
Counter
Counter