Cameo AZOR B1 Manual De Usuario página 10

P/T Macro: 000
(Pan/Tilt macro)
006
041
076
111
146
181
216
P/T Speed:
000
(Pan/Tilt speed)
SLAVE MODE (Slave)
Press MENU to access the selection menu. Using the UP and DOWN controls, select the menu item "Slave" (observe arrow) and confirm
with ENTER. Connect the slave and the master unit (same model, same software version) with a DMX cable (Master DMX OUT – Slave DMX
IN) and enable one the standalone mode on the master unit (User Macro 1-4). Now the slave unit will follow the master unit.
---------------- Menu ----------------
DMX Address
DMX mode
Stand Alone
Slave

Settings
System Info
DEVICE SETTINGS (Settings)
Press MENU to access the selection menu. Using the UP and DOWN controls, select the menu item "Settings" (observe arrow) and confirm
with ENTER.
---------------- Menu ----------------
DMX Address
DMX mode
Stand Alone
Slave
Settings

System Info
This will take you to the submenu for setting the following submenu items (selection with UP and DOWN, change status/value with UP and
DOWN, confirm with ENTER):
Settings (default = bold)
Display Reverse
Display Backlight
DMX Fail
10
– 005 off
– 040 PAN small > big
– 075 TILT small > big
– 110 PAN/TILT small > big
– 145 PAN/TILT (inverse) small > big
– 180 Circle small > big
– 215 Circle (inverse) small > big
– 255 Random small > big
– 255 Pan/Tilt Fast -> Slow
Mode
Slave
= Flip display
= Display lighting
= Operating status in the
event of
DMX signal interruption
On Rotate display by 180° (e.g. for overhead
installation)
Off No display rotation
On on permanently
Off Deactivates after approximately 10 seconds
of inactivity
Hold
Last command is retained
Blackout Activates blackout