Cameo AZOR B1 Manual De Usuario página 12

System Info
Firmware =
Temperature =
Operation Hours =
Error Info =
12
Displays device DISP:
firmware
XY:
MOTOR:
Displays device and LED
LED temperature
BASE
Unit °C/°F
Spotlight operating time xxx:xxh
indicator
Fault indicator CTR1-XY Error (Pan/Tilt
If a fault is not corrected Control Error)
by a reset or restart, the
CTR2-MOTOR Error
defective unit must be
(Motor Control Error)
repaired by an authori-
Pan Sensor Error (Pan
sed service centre.
Sensor Error after Pan/
Tilt Reset)
Pan Encode Error (Pan
Encode Error after Pan/
Tilt Reset)
Tilt Sensor Error (Tilt
Sensor Error after Pan/
Tilt Reset)
Tilt Encode Error (Tilt
Encode Error after Pan/
Tilt Reset)
Colour Reset Fail (Colour
Wheel Reset Error)
Gobo Reset Fail (Gobo
Wheel Reset Error)
Prism6 Reset Fail (Linear
Prism Reset Error)
Prism8 Reset Fail (Circu-
lar Prism Reset Error)
Focus Reset Fail (Focus
Reset Error)
Temperature Error (LED
temperature above
maximum)
Vx.x Main control
Vx.x Pan/Tilt control
Vx.x Control of head motors
xx °C/xx °F
xx °C/xx °F
Display in degrees Celsius Or degrees Fahrenheit
Displays the operating time of the spotlight in hours
and minutes
Solution: Restart
Solution: Restart
Solution: Restart
Solution: Restart
Solution: Restart
Solution: Restart
Solution: Reset head
Solution: Reset head
Solution: Reset head
Solution: Reset head
Solution: Reset head
Solution: Let it cool down, restart. Check maximum
ambient temperature (40° C)