Publicidad
Idiomas disponibles
Idiomas disponibles
Problem
Burner cap is dull or
has changed color
Unit has no power
Flames too big on
converted cooktop
(NP
LP)
Flame is too small or
too large
Cause
1. Scratching
2. Use of detergent or abrasive cleansers
Small burner cap
Shine is lost
Large burner cap
Shine is lost
1. House power turned off (power supply)
2. Tripped breaker
3. The power cord is not installed properly.
The installer missed part of the conversion.
(Check 2 parts: regulator, cooktop valve).
Pressure Regulator
1. Variable gas pressure
2. Installer did not check
Center adjustment screw
Do not use steel wool or
abrasive cleansers to clean.
To remove burnt-on food,
soak the burner heads in hot
water for 20–30 minutes. (Do
not use detergent)
Check power at main board
before calling for service.
Match power cord type and
outlet type
Properly install the power
cord
Check with installer first
Refer to installation manual
cooktop valve
Check with installer first
51
WARRANTY
Prevention
Publicidad
