Publicidad
Idiomas disponibles
Idiomas disponibles
5. Check the alignment of the frame and
the distance between the corner pillars
You are now almost done assembling the main frame of the pergola. Please double check to ensure
all beams and pillars have been assembled and fitted correctly. You may have to unscrew certain bolts
during this step.
You will also need a tape measure and a leveler to complete this step.
Choose one of the corner pillars
and work from this pillar. Choose this
pillar carefully as it will define the final
installation location of the pergola.
Use a leveler to measure against both of
the inner sides to ensure that the corner
pillar is straight and level.
Make sure this corner pillar does not
move position during the remaining
Measure the distances between the
adjacent corner pillars. Adjust accordingly
and ensure the distances match those
shown in the opposite figure.
a
= 279.05cm / 109.9 inches
b
= 279.05cm / 109.9 inches
5A
A
assembly steps.
5B
Leveler
EN
17
Publicidad
