Publicidad
Idiomas disponibles
Idiomas disponibles
SUMMARY OF THE PRODUCT
Combustion knapsack sprayer is a device that allows for fertilization with liquid fertilizers. Due to drive of the internal combustion
engine, built-in tank for chemical agent and the carrier system, the sprayer is portable device that allows for work outdoors, away
from sources of energy. The sprayer may also fulfi ll the role of a blower, which allows for the maintenance of order in the garden.
Correct, reliable, and safe operation of the device is dependent on its proper use, therefore:
Prior to working with the device, you should read all the instruction and keep it around.
For any damages or injuries caused by the device misuse, failure to comply with safety regulations and instructions in this manual,
the supplier is not responsible. The tool misuse causes the loss of user rights to the guarantee and warranty.
EQUIPMENT
The product is delivered complete, but requires the installation before starting the work. Equipment for sprayer is shown on the
picture.
TECHNICAL DATA
Type
Parameter
the number of cylinders
the number of strokes
cooling
Spark plug type
Engine displacement
Engine power
Maximum rotation speed of the engine
Recommended idling speed
The maximum rotation frequency of fan (measured at full
throttle with the inlet / outlet not veiled)
Fuel consumption at max. engine power
Specifi c fuel consumption at max. engine output
Fuel tank capacity
Capacity of chemical agent tank
Maximum range of spraying
The maximum speed of the outlet air
The rated capacity of the fan
Gross weight - empty
Gross weight - full
Noise.
sound pressure level
power L
WA
The vibration level (nozzle handle / appliance)
GENERAL SAFETY CONDITIONS
WARNING! During operation of a gasoline tool, it is recommended to always observe the basic safety regulations including those
mentioned below, in order to diminish the risk of fi re, electric shock and injury.
Before operation of the tool can be commenced, the whole manual must be read and kept.
ATTENTION! Read all the instructions mentioned below. If they are not observed, there is a risk of electric shock, fi re or injury.
The notion of „gasoline tool" that is used in the instructions refers to all tools that are powered with a stream of compressed air
at appropriate pressure.
OBSERVE THE FOLLOWING INSTRUCTIONS
O R I G I N A L
GB
Unit
COMBUSTION ENGINE Type 1E40FP-3Z
[cm
]
3
[kW]
[min
-1
]
[min
-1
]
[min
]
-1
[kg/h]
[g/kWh]
[l]
DEVICE
[l]
[m]
[m/s]
[m
/min]
3
[kg]
[kg]
[dB (A)]
[dB (A)]
[m/s
]
2
I N S T R U C T I O N S
YT-86240
Value
1
2
air
L6
41.5
2.13
7500
2800 ± 150
7500
0.68
600
1.2
20
12
80
17.67
11,2
33,0
99,0 ± 3,0
111,0 ± 3,0
0,8 ± 1,5 / 0,9 ± 1,5
15
Publicidad
