Operating Instructions; Using The Unit; How To Sit Correctly When Taking A Measurement - Omron MIT Elite Plus Manual De Instrucciones

HEM-7301-ITKE_main.book Page 15 Friday, October 3, 2008 12:42 PM

Operating instructions

3. Using the Unit

3.1

How to Sit Correctly When Taking a Measurement

You can take a measurement on either your left or right arm.
Notes:
• Measurements should be taken in a quiet place and you should be in
a relaxed, seated position. Make sure that the room is not too hot or
cold.
• Avoid eating, drinking alcohol, smoking, or exercising for at least 30
minutes before taking a measurement.
• Do not move or talk during measurement.
Correct
Posture
Sit upright
with your
back straight.
The gap between the
chair and the top of the
table should be between
25cm to 30cm.
Remove tight fitting clothing from
your upper arm, and any thick
clothing such as a sweater.
Do not place the cuff over thick
clothes and do not roll up your sleeve
if it is too tight.
Place your arm on a table so
that the cuff will be at the same
level as your heart.
3.Using the Unit
EN
15