Publicidad
Idiomas disponibles
Idiomas disponibles
Introduction
The Druck DPI104 / DPI104-IS pressure indicator uses a
silicon transducer to produce a pressure reading in
pressure units. These user instructions include the
operations for all DPI104 / DPI104-IS Pressure Indicators,
safety instructions and the requirements for intrinsically
safe instruments.
The DPI104 / DPI104-IS is equipped with ISO 228 G1/4
male, or 1/4 NPT male, pressure connector up to 700 bar
(10,000 psi). Above 700 bar (10,000 psi), autoclave male
pressure connectors are supplied.
For the full specification and user manual, refer to Druck
website:
https://druck.com/essential
WARNING
Do not use with media that has
an oxygen concentration > 21 % or other
strong oxidizing agents.
This product contains materials or fluids that
may degrade or combust in the presence of
strong oxidizing agents.
Do not use the non-intrinsically safe DPI104 in
locations where explosive gas, vapor or dust
are present. There is a risk of an explosion.
Some liquid and gas mixtures are dangerous.
This includes mixtures that occur because of
contamination. Make sure that the DPI104 /
DPI104-IS is safe to use with the necessary
media.
It is dangerous to ignore the specified limits
(refer to data sheet) for the DPI104 / DPI104-IS
or to use the DPI104 / DPI104-IS when it is not
in its normal condition. Use the applicable
protection and obey all safety precautions.
To prevent a dangerous release of pressure,
isolate and bleed the system before
disconnecting a pressure connection. A
dangerous release of pressure can cause
injury.
To prevent an explosion or fire, use only the
Druck specified battery and external supply.
Safety
The DPI104 / DPI104-IS has been designed to be safe
when operated using the procedures detailed in this
manual. Do not use this equipment for any other purpose
than that stated, the protection provided by the equipment
may be impaired.
Before installing and using the DPI104 / DPI104-IS, read
and understand all the related data. This includes: all local
safety procedures and installation standards (for example:
EN 60079-14), and this document.
Symbols
Symbol
Description
This equipment meets the requirements of all
relevant European safety directives. The equipment
carries the CE mark.
This equipment meets the requirements of all
relevant UK Statutory Instruments. The equipment
carries the UKCA mark.
This symbol, on the equipment, indicates a warning
and that the user should refer to the user manual.
Druck is an active participant in the UK and EU
Waste Electrical and Electronic Equipment (WEEE)
take-back initiative (UK SI 2013/3113, EU directive
2012/19/EU).
The equipment that you bought has required the
extraction and use of natural resources for its
production. It may contain hazardous substances
that could impact health and the environment.
In order to avoid the dissemination of those
substances in our environment and to diminish the
pressure on the natural resources, we encourage
you to use the appropriate take-back systems.
Those systems will reuse or recycle most of the
materials of your end life equipment in a sound way.
The crossed-out wheeled bin symbol invites you to
use those systems.
If you need more information on the collection,
reuse, and recycling systems, please contact your
local or regional waste administration.
Please visit the link below for take-back instructions
and more information about this initiative.
https://druck.com/weee
Repair
Do not do repairs to this equipment. Return the equipment
to the manufacturer or an approved service agent.
Intrinsically Safe Devices
Product Feature
Intrinsically safe
Color
Static Dissipative
Battery Specification
Refer to "Batteries" on page 2 and
"Replacing the Batteries" on page 2
Conformances
Note: In this document, a "safe area" includes non-
hazardous location, unclassified area.
English–DPI104 / DPI104-IS Safety Instructions | 1
DPI104
DPI104-IS
Blue
Yellow
ETL
IECEx
INMETRO
CE
ATEX
UKCA
UKEX
Refer to "Specific
Conditions of Use"
on page 2
Copyright 2018 Baker Hughes Company.
Publicidad
